|
|
|
|
|
|
|
Tannoy IW6 TDC In-Wall Speakers NIB
|
|
|
Time left: |
(10/9/2008 2:30:02 AM) |
Seller: |
|
Bids: |
12 |
ildfrost |
|
Current Bid: |
USD 131.1 |
|
|
|
|
|
|
|
|
You are bidding on one(1) pair of Tannoy IW6 TDC speakers. They are new in the box and are not refurbished.
The iw6 TDC is a full bandwidth in wall speaker system, using a 165mm (6.50") Tannoy Dual Concentric™ point source, constant directivity drive unit with an additional 25mm (1.00") Tannoy SuperTweeter™. Designed primarily for installation into standard stud partition wall systems, it may also be used in cavity wall installations constructed with standard thickness drywall as well as a wide range of other wall construction types with a surface thicknes of up to 25mm (1.00”).
High power handling and 91dB efficiency ensure this compact unit is ideally suited to applications requiring the combination of premium sonic quality for music and speech reinforcement and exceptional reliability and intelligibility.
From the website:
PERFORMANCE
System Type In-wall loudspeaker
Frequency Response (1) 75Hz - 51kHz (+/-3dB)
Low Frequency Alignment (2) 36Hz (-6dB)
Recommended Amplifier Power 20 - 180W @ 8 Ohms
Power Handling (3) Average: 90W
Programme: 180W
Peak: 360W
Sensitivity 2.38 Volts @ 1 metre (1) Anechoic: 91dB
Half space: 94dB
Maximum SPL @ 1 metre (4) Average: 110dB
Peak: 116dB
Impedance 8 Ohms
DRIVE UNIT
Dispersion 90 degrees
Driver Complement Supertweeter™: 25mm (1.00”) titanium dome
Dual Concentric™: 25mm (1.00”) titanium dome Bass driver: 165mm (6.50”)
CROSSOVER
Frequency 1.8kHz, 16kHz
Type Passive
OPTIONAL THP 60 TRANSFORMER
Maximum SPL (4) 107dB
Wattage Tap Selections 60, 30, 15, 7.5 Watts
CONSTRUCTION
Finish White - paintable
Connectors Gold plated spring terminals
Dimensions (H x W)
Front baffle: 320 x 209mm (12.60 x 8.23”)
Maximum wall thickness: 25mm (1.00”)
Cut-out Dimensions (H x W) 271.50 x 168.50
(10.68 x 6.63")
Rec. in-wall Mounting Volume 20 litres
(0.7 cu.ft.)
Mounting Depth 98.9mm
(3.89”)
Weight (each) 3kg
(6lbs 6oz)
Accessories Pre-installation ring
Back can
Back can with 60W transformer
NOTES: (1) Average over stated bandwidth, measured at 1m on axis in an anechoic chamber, in a critically tuned enclosure. (2) Measured ‘in-wall’. (3) Long term power handling capacity as defined in EIA standard RS - 426A. Crest factor 6. (4) Unweighted pink noise input, measured at 1m in an anechoic chamber.
Sold as is, use manufactures warranty.
|
|
|
|